Sheeting Capabilities

Our Sheeting capabilities centre around our two dedicated sheeting systems—one for paper and another for board. These machines can be reset to run other rolls, including film, synthetic materials and label stock.

Today’s high speed offset presses require very accurately cut sheets. More conventional technology has meant that printers had to satisfy themselves with imprecisely cut sheets—resulting in unnecessary waste and loss of production to clear up spoiled sheets. As well, loose fibres from badly cut sheets tend to damage printing machines, as well as cause a health hazard.

Our sheeting systems use cutting edge twin knife technology for super clean and accurate cuts. Our paper sheeter has four unwind stands, while the board sheeter has two unwind stands.

Our sheeting systems also feature three bar rotary decurlers, four web guide aligners, four tension controllers and an ink pad marking system. Each sheeting system has a dedicated A3 size label printer to provide large size labels for each pallet of converted sheets.

With the installation of our sheeting systems, we have installed a leading edge wrapping system. This wrapping line incorporates two stretch wrapper and works automatically to first wrap horizontally and then vertically. Click here for more details.

Sheeting Services Specifications

INPUT REELS

Maximum Width 1650 mm
Minimum Width 430 mm
Maximum Diameter 2130 mm
Minimum Diameter 430 mm
Maximum Wheel Weight 4000 kg
Core Sizes 76/127/152/203/304 mm

SHEETING ONLY

Accuracy +/- 0.38 mm
Maximum Cut Length 2080 mm
Minimum Cut Length 280 mm
Maximum Sheet Load 1000 gsm

SHEETING AND SLITTING

Maximum Number Out 4 sheets
Minimum Cut Width

230 mm

Maximum Slitting Load 600 gsm

PALLETISING

Maximum Pallet Height 1830 mm (includes pallet)
Maximum Pallet Weight

2270 kg